The Ultimate Guide to Connect Netgear WiFi Range Extender

On the off chance that you need to extend the existing WiFi network to the spots of weak signal but experiencing issues in doing as such, then opt for Netgear WiFi range extender. However, the most common issue you come across while setting it up is unable to connect the extender to a network. Also, some users are not able to access setup page.

You won’t need to be tech-savvy to determine and fix the issue. We have come up with some comprehensive and quick solutions to help you in such a manner.

Instructions On How to Connect Netgear WiFi Extender

All things considered, there are two potential ways by which you can connect the Netgear Extender to a network. Both the methods are discussed briefly here. Choose any one which you find useful to you.

Connect Netgear WiFi Extender With Ethernet Port

On the off chance that you own a Netgear N300 WiFi extender that has an Ethernet port, at that point, here is the thing that you can do:

  • Connect the Netgear WiFi Extender with your PC through an Ethernet cable.

  • At that point, sign in to the web UI of the Extender utilizing an internet browser.

  • A window will be prompted requesting that you give username and password.

  • On the off chance that you are a new user of Netgear AC1200 WiFi extender, at that point, utilize the default details for logging in.

  • After signing in, visit Setup AMD and select Wireless Settings.

  • At that point check the Network Key (Password) section under Security Options.

  • In the event that the password entered does not match the router password, at that point the login will fail. Therefore, you have to customize it to make it same as the router Network Key.

  • Next, click on Apply and reconnect the Netgear WiFi Extender to your WiFi gadgets.

Now, check if these steps have helped in figuring out how to connect Netgear WiFi range extender or not.

Move to the next option to get familiar with an alternate method of connecting your Netgear Extender to a network.

Ar you IT expert and looking for job than you should visit

Connect Netgear WiFi Extender Without an Ethernet Port

On the off chance that the extender does not have an Ethernet port, then execute the below-given steps connect your Netgear wireless extender:

  • Set the Netgear WiFi Extender back to its default settings by applying a factory reset.

  • To do that, push the Factory Settings button and hold it on for a few seconds.

  • At that point, connect your PC to a WiFi network by means of WiFi Extender.

  • Now, open a web browser on your computer and navigate to login web page.

  • A prompt will show up on your PC screen, where you need to enter the login credentials.

  • On the off chance that you are recently utilizing a Netgear Extender and have not yet reset the login information, use the default login details.

  • Next, go to the Setup Wizard section to set network connectivity to your own router.

  • While reconnecting the network to your router, guarantee that you have not utilized WPS (WiFi Protected Setup).

  • Lastly, complete the procedure by further associating your PC or different remote gadgets to the Netgear WiFi extender login.

Now, check if this method has helped you in knowing how to connect Netgear WiFi Extender. Else, get in touch with us shortly to get further help with this respect via the comments below.

Leave a Reply